中空玻璃開膠了，您可以按照以下步驟進行處理：

　　The insulating glass has opened, you can follow the following steps to handle it:

　　卸下玻璃 ：

　　Remove the glass:

　　如果是打膠的，使用美工刀將四周的膠刮掉。

　　If it is adhesive, use a craft knife to scrape off the adhesive around.

　　如果使用皮條，則將皮條取下。

　　If using leather straps, remove them.

　　然后輕輕掰下玻璃壓線，取下玻璃。

　　Then gently break off the glass pressure line and remove the glass.

　　清理玻璃四周 ：

　　Clean the surroundings of the glass:

　　刮除玻璃四周的殘余膠。

　　Scrape off the residual adhesive around the glass.

　　使用酒精清洗，然后用干凈的抹布擦干凈。

　　Clean with alcohol and then wipe clean with a clean cloth.

　　重新合片 ：

　　Re film:

　　清潔干凈后，重新將玻璃合片。

　　After cleaning thoroughly, reassemble the glass.

　　使用鋁格條（位于玻璃中間）進行合片。

　　Use aluminum grid strips (located in the middle of the glass) for lamination.

　　合片時確保四周打膠均勻嚴實，避免漏氣漏水。

　　Ensure that the adhesive is evenly and tightly applied around the edges during lamination to avoid air and water leakage.

　　干燥與安裝 ：

　　Drying and installation:

　　合片后放置一天，讓膠水完全干燥，建議1-2天。

　　After laminating, let the adhesive dry completely for one day, recommended 1-2 days.

　　干燥后，將玻璃重新安裝到窗框上。

　　After drying, reinstall the glass onto the window frame.

　　使用玻璃膠或皮條進行四周密封。

　　Use glass glue or leather tape to seal around.

　　請注意，如果中空玻璃出現(xiàn)裂紋或脫膠，不僅會影響其隔音隔熱效果，還可能存在安全隱患，此時應考慮更換玻璃。如果不確定問題原因，建議聯(lián)系專業(yè)人員進行檢查和維修

　　Please note that if there are cracks or delamination in the insulated glass, it will not only affect its sound insulation effect, but may also pose a safety hazard. In this case, replacement of the glass should be considered. If the cause of the problem is uncertain, it is recommended to contact professionals for inspection and repair

　　本文由中空玻璃加工設備提供幫助，更多的相關內容請點擊：http://ruiyingjituan.com希望本文能夠為您帶來幫助，感謝您的閱讀！

　　This article is assisted by insulating glass processing equipment. For more related content, please click: http://ruiyingjituan.com I hope this article can be helpful to you. Thank you for reading!