在施膠過程中，中間的中斷時間相對較長，或多次積累，并且在施膠結束時清洗不干凈，特別是在夏季溫度較高時，膠會(huì )迅速固化。于中斷應該持續多長時間，建議根據膠水斷裂前的溫度和濕度測量膠水開始之前的溫度，因此實際值會(huì )有所不同。另外，客戶經常需要膠水固化得更快，中斷時間越長，很可能會(huì )造成顆粒。
In the process of sizing, the interruption time in the middle is relatively long, or accumulated for many times, and the cleaning is not clean at the end of sizing, especially when the temperature is high in summer, the sizing will solidify rapidly. As for how long the interruption should last, it is recommended to measure the temperature before the glue starts according to the temperature and humidity of the day before the glue breaks, so the actual value will be different. In addition, customers often need glue to solidify faster, and the longer the interruption time, it is likely to cause particles.
A/B組分的氣壓不足，導致混合不均勻，膠水緩慢，容易產生顆粒；
The air pressure of component A / B is insufficient, resulting in uneven mixing, slow glue and easy to produce particles;

B組分尚未檢查和清理。組分B對水蒸氣反應靈敏。由于運輸和存儲環境等偶然因素，組件B的表面可能會(huì )結皮。將蒙皮的材料壓入管道中可能會(huì )產生顆粒。簡單的處理方法是使用the頭探索結節以進行清理，而不會(huì )影響膠水的使用；
Component B has not been inspected and cleaned. Component B is sensitive to water vapor. Due to accidental factors such as transportation and storage environment, the surface of component B may be skinned. Pressing the material of the skin into the pipe may produce particles. The simple treatment method is to use the head to explore the nodules for cleaning without affecting the use of glue;
長期的木材清潔過濾器和單向止回閥。濾網和單向止回閥采用通用的機械密封，長時間使用后容易產生顆粒。建議定期清潔濾網，單向止回閥，靜態混合器和膠槍?zhuān)?br /> Long term wood cleaning filter and check valve. The filter screen and one-way check valve adopt universal mechanical seal, which is easy to produce particles after long-term use. It is recommended to clean the filter screen, one-way check valve, static mixer and glue gun regularly;
B組分壓力板上的O形環已經使用了很長時間，已經松動，B組分很可能會(huì )留在間隙之間，并且B組分很可能由于水分而形成顆粒，這是因為不容易注意到
The O-ring on the pressure plate of component B has been used for a long time and has become loose. Component B is likely to stay between the gaps, and component B is likely to form particles due to moisture, which is not easy to notice
以上就是今天帶給大家的知識，雙組份打膠機專注行業多年，為用戶不斷的提供有價值的內容，更多內容請繼續關注我們：http://ruiyingjituan.com
The above is the knowledge brought to you today. The two-component gluing machine has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://ruiyingjituan.com