玻璃的清洗是制作中空玻璃的一道工序，也是由中空玻璃生產線的前3段來完成的，這3段分別是上片段，清洗風干段和運輸段。玻璃由上片段進入清洗風干段，先由3組毛刷和水進行清洗，然后由大功率熱風進行吹干，吹干后玻璃進入運輸段。
Glass cleaning is a process of making insulating glass, which is also completed by the first three sections of the insulating glass production line, which are the upper section, cleaning and drying section and transportation section respectively. The glass enters the cleaning and air drying section from the upper section, which is cleaned by three groups of brushes and water, and then dried by high-power hot air. After drying, the glass enters the transportation section.
中空玻璃生產線的毛刷是清洗玻璃的關鍵部位，對于毛刷的定期維護十分重要。玻璃表面的浮塵、油污和玻璃襯紙的紙膠等很容易黏附在毛刷的刷毛上，有些還會(huì )隱藏在毛刷的根部，如果不能及時清理，則會(huì )污染被清洗的玻璃表面。尤其是對于清洗離線LOW-E玻璃的清洗機，更要注意毛刷的定期維護。維護時可采用高壓水槍進行沖洗。中空玻璃生產線的清洗段，在長期使用后，由于加工的中小型玻璃比較多，其毛刷下部比上部磨損的快，也需要修整。
The brush of insulating glass production line is the key part of cleaning glass, which is very important for the regular maintenance of the brush. The floating dust, oil stain on the glass surface and the paper glue of the glass lining paper are easy to adhere to the bristles of the brush, and some will be hidden at the root of the brush. If it cannot be cleaned in time, it will pollute the cleaned glass surface. Especially for the off-line Low-E glass cleaning machine, pay more attention to the regular maintenance of the brush. High pressure water gun can be used for flushing during maintenance. In the cleaning section of the insulating glass production line, after long-term use, due to the large number of small and medium-sized glass processed, the lower part of the brush wears faster than the upper part, and it also needs to be repaired.

目前一些中空玻璃生產廠家大多采用自來水、井水或普通凈水來清洗玻璃，這需要根據實際情況來判斷。一般因為自來水、尤其是井水中含有大量的鈣、鎂、氯等離子，當這些離子附著在玻璃表面時，會(huì )影響丁基膠、二次密封膠與玻璃表面的粘結質量，從而影響中空玻璃的密封壽命，容易導致密封失敗。普通的凈水僅僅是過濾掉了水中的顆粒性雜質，不能去除水中的離子。如果中空玻璃要求比較高，建議加裝凈水裝置，使用去離子水洗清玻璃。
At present, some insulating glass manufacturers mostly use tap water, well water or ordinary purified water to clean the glass, which needs to be judged according to the actual situation. Generally, tap water, especially well water, contains a large amount of calcium, magnesium and chlorine plasma. When these ions adhere to the glass surface, they will affect the bonding quality between butyl glue, secondary sealant and the glass surface, thus affecting the sealing life of insulating glass and easily leading to sealing failure. Ordinary water purification only filters out the particulate impurities in the water and cannot remove the ions in the water. If the requirements for insulating glass are relatively high, it is recommended to install a water purification device and wash the glass with deionized water.
中空玻璃生產線的清洗機水箱中的水要經常更換以保持清潔。在換水時要將水箱中的沉積物清理干凈，以防止水箱的供水泵將這些沉積物帶到毛刷上。中空玻璃的清洗用水嚴禁使用洗滌劑。
The water in the water tank of the washing machine of the insulating glass production line should be changed frequently to keep it clean. When changing water, the sediment in the water tank shall be cleaned to prevent the water supply pump of the water tank from bringing these sediment to the brush. It is forbidden to use detergent in the cleaning water of hollow glass.
本文的精彩內容由中空玻璃加工設備提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://linshi.jncsjx.com 我們有專門的客服為您解答問題
The wonderful contents of this article are provided by insulating glass processing equipment. There are many wonderful contents on this website. You can click to enter more contents: http://linshi.jncsjx.com We have special customer service to answer your questions