雙組分膠機分為全自動、半自動和全自動三種，很多客戶不知道如何啟動，以及如何操作，
　　The two-component glue machine is divided into three types: full-automatic, semi-automatic and full-automatic. Many customers don't know how to start and operate it,
　　，為什么要用雙組份上膠機來工作
　　First of all, why do we use a two-component gluer to work
　　設備使用的重要性:中空玻璃在生產過程中,有一個鏈接是非常重要的,是用結構膠將完全密封的兩塊玻璃,因為人造膠是緩慢的,關閉不好,所以大量的中空玻璃生產所需要的設備。
　　The importance of equipment use: in the production process of insulating glass, it is very important to have a link. It is two pieces of glass that are completely sealed with structural glue. Because the artificial glue is slow and can not be closed well, a large number of insulating glass production equipment are needed.

　　雙組分打膠機操作方法:
　　Operation method of two-component dispenser:
　　1打開氣泵開關，主電源開關，控制臺開關，在控制臺按下手動按鈕
　　1 first turn on the air pump switch, main power switch and console switch, and press the manual button on the console
　　2然后在屏幕上找到原點設置，點擊輔助原點設置，然后點擊頭原點設置
　　2 then find the origin setting on the screen, click auxiliary origin setting, and then click head origin setting
　　3.設定原點時避免頭與輔助吸盤碰撞。然后回去看看玻璃的厚度
　　3. Avoid collision between the head and the auxiliary suction cup when setting the origin. Then go back and see the thickness of the glass
　　玻璃的厚度，然后是鋁墊片，然后是玻璃的厚度
　　The thickness of the glass, then the aluminum gasket, then the thickness of the glass
　　5輸入后，點擊設置進入。命令位置和當前位置可以相同的值，注意輸送帶的設置不要有玻璃。
　　5 after input, click settings to enter. The command position and the current position can be the same value, pay attention to the setting of the conveyor belt without glass.
　　雙組分打膠機運行分析:
　　Operation analysis of two-component dispenser:
　　1 .開始看每邊每角的膠水是否均勻
　　1. Start to see if the glue on each side and corner is even
　　2. 單擊“返回”可在屏幕上找到密封公式。點擊回車，顯示當前密封壓力
　　2. Click back to find the seal formula on the screen. Click enter to display the current sealing pressure
　　如果每邊都缺膠，則可以增加壓力，大量膠的壓力大，少量膠的壓力小。
　　If each side is short of glue, the pressure can be increased. The pressure of a large amount of glue is large, and that of a small amount of glue is small.
　　以上就是對雙組份打膠機如何正常開機的詳細介紹，想要了解更多請點擊官網http://linshi.jncsjx.com
　　The above is a detailed introduction of how to start the two-component dispenser safely and normally. For more information, please click http://linshi.jncsjx.com