雙組份打膠機供膠壓力不足，這個情況其實小編在種情況的已經進行過描述了，即便你沒有對打膠機的移動速度進行調節也出現了打膠不飽滿的情況，那么也有可能是供膠壓力過小導致的。這時候我們僅僅需要調整供膠壓力即可的這個問題的發生。

　　Two-component glue machine glue supply pressure is insufficient, this situation is small in the first case has been described, even if you don't adjust the moving speed on the glue machine glue also appeared not full, then there may be too little pressure to glue. At this point, we just need to adjust the glue pressure to solve this problem perfectly.

　　打膠速度過快導致的，有的客戶為了加快自己的生產節奏追趕生產計劃，將打膠速度認為調整的過快，導致膠體還沒有完全達到合格標準機頭就已經移動到下一個位置進行打膠操作了。

　　To speed up the pace of production, some customers in order to speed up the pace of their own production to catch up with the production plan, the glue speed is considered to be adjusted too fast, leading to the colloid has not yet reached the qualified standard, the head has moved to the next position for glue operation.

　　如果我們需要加快打膠的速度調整了打膠機的移動參數的話，那么我們對應的也應該對供膠系統也進行相應的設置，比如這時候我們就需要加大供膠壓力，增大打膠機的出膠速度來配合對象的移動速度的增加。如果我們僅僅是單獨的增加了打膠機的移動速度而沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。

　　If we need to accelerate the speed of adjustment of the glue glue machine the movement parameters, then we should also carry out corresponding setting on the glue supply system, for example, this time we need to increase the glue supply pressure, increase the speed of glue machine glue to match the speed of the moving object shift increases. If we just increase the speed of the glue machine alone without adjusting the pressure, it is likely that the glue is not full.

　　機頭感應器損壞，這種情況非常的少見，但是也不排除這種情況的發生。在我們的打膠機機頭有一個對鋁條深淺進行探測的感應器，如果發現鋁條過深或者過淺的時候他會(huì )自動的調整移動的移動速度以及供膠壓力(自動調整幅度是小范圍內的)。

　　The damage to the head sensor is very rare, but it doesn't rule out that. There is a sensor for detecting the depth of the aluminum bar at the head of our punch. If the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed and the pressure of glue supply (the range of automatic adjustment is within a small range).

　　您的需求就是我們努力的方向，您的追求就是我們的追求，歡迎您的到來，我們一起進步，一起創(chuàng )新!

　　Your demand is the direction of our efforts, your pursuit is our pursuit, welcome your arrival, we progress together, together with innovation!