The process of automated production of insulating glass production line equipment can be summarized as follows:

原料倒入模具：將所需的原料倒入模具中，然后加熱熔化并凝固成液態。

Pouring raw materials into the mold: Pour the required raw materials into the mold, then heat, melt, and solidify into a liquid state.

加熱、成型和冷卻：使用人力或電動工具進行攪拌、成型和冷卻的工序。

Heating, forming, and cooling: The process of stirring, forming, and cooling using manual or electric tools.

泡沫材料混合：在成型階段，需要確保泡沫材料能夠均勻地混合在一起。

Foam material mixing: in the molding stage, it is necessary to ensure that foam materials can be mixed together evenly.

控制產品尺寸：這是為了確保產品的質量。

Control product size: This is to ensure product quality.

自動化控制系統：中空玻璃成型機的控制系統主要完成對模組的加熱和冷卻、上下輥之間壓力的控制、模具的升降運動控制以及溫度的設定與控制等任務。

Automation control system: The control system of the insulating glass molding machine mainly completes tasks such as heating and cooling of the module, controlling the pressure between the upper and lower rollers, controlling the lifting motion of the mold, and setting and controlling the temperature.

噴涂系統控制：熱熔膠噴涂系統的控制系統則負責在高溫狀態下將液態硅酮結構密封材料噴到兩塊平板中間形成氣室，并調節噴槍的壓力來實現氣室內的壓力大小變化，以及根據設定的程序來調整出料的流量以及噴射的角度等。

Spraying system control: The control system of the hot melt adhesive spraying system is responsible for spraying liquid silicone structural sealing material into the middle of two flat plates to form an air chamber under high temperature conditions, adjusting the pressure of the spray gun to achieve pressure changes in the air chamber, and adjusting the discharge flow rate and spraying angle according to the set program.

實時監控：在中控室可以實時監控整個設備的運行狀態，如溫度顯示、電流顯示以及報警信息等。當出現故障時可以通過中控室的屏幕查看具體的情況并進行相應的處理。

Real time monitoring: In the central control room, the operation status of the entire equipment can be monitored in real time, such as temperature display, current display, and alarm information. When a malfunction occurs, the specific situation can be viewed through the screen in the central control room and corresponding measures can be taken.

請注意，這是對中空玻璃生產線設備實現自動化生產的一種簡單化的描述，實際的過程可能更復雜，并涉及更多的步驟和細節。

Please note that this is a simplified description of the automated production of insulating glass production line equipment, and the actual process may be more complex and involve more steps and details.