中空玻璃生產線零件受載荷時會(huì )產生彈性變形。當雙組份打膠機彈性變形量超過許可范圍時，零件或機器便不能正常工作。

　　The parts of the insulating glass production line produce elastic deformation when they are loaded. Parts or machines will not work properly when the elastic deformation of the two-component punch exceeds the allowable range.

　　彈性變形量過大會(huì )破壞零件間相互位置及配合關系，有時還會(huì )引起附加動載荷及振動。對塑性材料制成的零件，當載荷過大使零件內的應力超過了材料的屈服極限時，零件將產生塑性變形，塑性變形會(huì )使零件的尺寸和形狀發生性改變，使零件不能正常工作。

　　The elastic deformation can destroy the mutual position and coordination between parts, and sometimes cause additional dynamic load and vibration. The parts made of plastic material, when the load stress in the ambassador of parts exceeds the material yield limit, the parts will produce plastic deformation, plastic deformation makes the part size and shape of a permanent change, the parts can not work normally.

　　中空玻璃打膠機，雙組份打膠機純氣動進口作為國內做常用的中空玻璃設備之一，已經成為廣大客戶設備，他的構造以及配件對得起他的，作為中空玻璃設備，涂膠機生產廠家來說，分析一下是怎么構成和組成的。

　　Hollow glass glue machine, two-component glue machine imported pure pneumatic as domestic one of the commonly used hollow glass equipment, has become the preferred equipment for our customers, as well as parts of his structure to live up to his price, as a manufacturer of hollow glass equipment, coating machine, analysis about how the structure and composition of the.

　　1、中空玻璃打膠機輔以增壓供料壓盤，充分保證高粘度流體的滿腔輸送，基料壓入并增高高壓，固化劑壓入并增壓，再送比例泵，固化劑的流量由調比機構調節，二種組份同時送入混合器，充分混合后到達擠膠槍

　　1, hollow glass glue machine with pressurized feeding plate, and fully guarantee the full transport of high viscosity fluid, the base material is pressed in and increased to high pressure, pressure and curing agent into the supercharger, sent to the proportional pump, curing agent flow by adjusting mechanism for adjusting the ratio of two components at the same time, into the mixer after mixing at glue gun

　　2、 基料泵、固化劑泵及比例泵均采用特殊的高壓柱塞泵，雙向等量供料，基料泵有液壓系統驅動，固化劑泵由氣動馬達驅動。

　　2, base pump, curing agent pump and proportional pump are used special high-pressure plunger pump, two-way equal feeding, base pump has hydraulic system drive, curing agent pump driven by pneumatic motor.

　　3、下端出口及混合器進料處均設有高壓球閥，沖膠泄壓用，混合器上設有單向針閥，不但使混膠更加均勻，而且防止兩種組份戶竄，將通道固化堵塞。

　　3, the lower end of the outlet and mixer feeding place are equipped with high pressure ball valve, glue, pressure relief, the mixer is equipped with one-way needle valve, not only to make mixing more evenly, but also to prevent the two components of households channeling, the channel curing blocked.

　　氣動中空玻璃打膠機組成：高能雙組份打膠機主要有基料泵、固化劑泵、比例泵、基料泵升降系統、調比結構、混膠系統 、氣動系統、液壓系統及電氣系統組成。分工明細，產能。

　　Pneumatic, hollow glass glue machine: high energy two-component glue machine main material pump, pump, pump, curing agent ratio of base material pump lifting system, adjusting structure, mixing system, gas system, hydraulic system and electrical system. Breakdown of labor breakdown, efficient production capacity.

　　本文由雙組份打膠機為您提供，我們的網站是:http://linshi.jncsjx.com/我們將以全心全意的熱情為您提供更的服務，歡迎您的訪問!

　　This article is made up of a two component press machine. Our website is: http://linshi.jncsjx.com/, we will provide you with better service with your wholehearted enthusiasm, and welcome your visit!