濟南膠機使用的膠主要是AB膠。AB膠通常有環氧樹脂、硅樹脂和聚氨酯。當膠水是黑色或深灰色時，內部將填充填料。與環氧樹脂一樣，聚氨酯通常是用A填充硅膠，如果硅膠的比例相同，則用膠水A和膠水B填充。
　　The rubber used in Jinan glue machine is mainly AB glue. AB gum usually has epoxy resin, silicone resin and polyurethane. When the glue is black or dark grey, the interior will be filled with fillers. Like epoxy resin, polyurethane is usually filled with silica gel A. If the proportion of silica gel is the same, it is filled with glue A and glue B.
　　填料的成分很多，有的硅粉、有的石英砂、有的石灰粉等填料具有導熱散熱的作用，從而提高了硬度。但是這些填充物很硬，它們會(huì )沉淀，這就是那層和膠水。如果涂上一層，膠水的性能會(huì )發生變化，密度會(huì )發生變化，導致比例的變化，導致膠水的性能無法使用，膠水背面的性能被固化，被沖洗出來的產品不合格。
　　There are many fillers, some silica powder, some quartz sand, some lime powder and other fillers have the function of heat conduction and heat dissipation, thus improving the hardness. But these fillers are very hard, and they deposit, that's the layer and glue. If coated with a layer, the performance of the glue will change, the density will change, leading to changes in proportion, resulting in the performance of the glue can not be used, the performance of the glue back is cured, the product washed out is not qualified.
　　濟南膠機如何防止膠水沉降?
　　How does Jinan glue machine prevent glue settlement?
　　1. 在物料桶中加入攪拌功能。啟動后，攪拌器將不斷旋轉攪拌器，防止攪拌器沉降。此外，攪拌棒更有效。如果棍子太短，夠不到底部，膠水就會(huì )沉淀下來。
　　1. Stirring function is added to the material barrel. After starting, the agitator will continuously rotate the agitator to prevent the settling of the agitator. In addition, stirring rods are more effective. If the stick is too short to reach the bottom, the glue will settle down.

　　2. 澆注前，打開塑料桶，用攪拌棒或鉆頭攪拌，然后倒入桶內。
　　2. Before pouring, open the plastic bucket, stir it with a stirring rod or drill, and then pour it into the bucket.
　　3、可以買一些高品質的膠水，高品質的膠水，填充劑比較小，顆粒比較細，沉淀不那么嚴重。
　　3. Can buy some high-quality glue, high-quality glue, filler is relatively small, particles are relatively fine, precipitation is not so serious.
　　4. 購買接近生產日期的膠水。膠水停留的時間越長，沉積就越嚴重。
　　4. Purchase glue close to the production date. The longer the glue stays, the more serious the deposition will be.
　　5. 好每天都讓上膠機運轉。請不要長時間使用它。如果你很久沒有使用它(例如，一周半)，從桶中取出膠水，用酒精沖洗。否則，膠水會(huì )沉淀在桶和管道里。
　　5. Better let the glue machine run every day. Please don't use it for long. If you haven't used it for a long time (for example, a week and a half), remove the glue from the bucket and rinse it with alcohol. Otherwise, glue will settle in barrels and pipes.
　　6. 為了防止沉淀，試管越短越好。這管子太長了，膠水容易沉積在里面。
　　6. In order to prevent precipitation, the shorter the test tube, the better. The pipe is too long and glue deposits easily in it.
　　以上內容由濟南膠機小系列整理而成，本觀點不代表本站觀點。
　　The above content is organized by Jinan rubber machine small series, this point of view does not represent the point of view of this site.