打膠機不被人知的小功用,你了解嗎
Glue machine is not known for small function.
全主動打膠機
Full active glue machine
1.有防滴膠功用及膠槍嘴防干功用。體系具有計時功用，當工件涂膠結束退出涂膠區域后開端計時。
1., we have the function of anti dropping glue and the dry prevention function of glue gun mouth. The system has timed function. When the workpiece is finished and the adhesive area is removed, the timer is started.
在5分鐘(時刻參數可調)內，沒有搬出工件或沒有放置工件或機器人沒有動作，膠槍主動侵入硅油中，避免膠干。
In 5 minutes (adjustable time parameters), no removal of the workpiece or no placement of the workpiece or robot no action, the gun actively penetrates silicone oil to avoid drying.
2.械手前端安有檢測傳感器，在涂膠前對工件涂膠面進行方位檢測，主動補償修正涂膠嘴與工件外表的距離，確保涂膠效果。
2. The front end of the manipulator is equipped with a detection sensor, which detects the orientation of the coating surface of the workpiece before gluing, and actively compensates and corrects the distance between the coating nozzle and the surface of the workpiece to ensure the gluing effect.
3.膠速度參數為預置變量，能夠經過編程軟件便利調整，參數改動設置有密碼保護功用，避免他人隨意改動。
3. The glue speed parameter is a preset variable, which can be adjusted conveniently by programming software. The parameter setting has the function of password protection to avoid other people's random change.
4.嘴從硅油杯內抬起開端涂布前，有專用膠嘴檫拭設備，將膠嘴沾起的油液去除，避免噴涂在工件上影響密封功能
4. Before the nozzle is lifted from the silicone oil cup and coated, there is a special rubber nozzle wiping equipment to remove the oil from the nozzle, so as to avoid the influence of spraying on the sealing function of the workpiece.
5.制操作面板上設有獨自的旋鈕用于開閉涂膠閥便于將涂膠閥內的膠液排出。
5. The operation panel is provided with a separate knob for opening and closing the glue coating valve to facilitate the discharge of glue from the glue coating valve.
6.機器人運動區域內設置一接膠盒，用于接納涂膠閥排出的廢膠，避免污染。
6. A plastic box is arranged in the moving area of the robot to accept the waste glue discharged from the glue-coating valve and avoid pollution.
7.確保運用或停產時體系中的存留膠不固化，設備暫?；蜷L時刻停用涂膠槍嘴有保護措施，確保槍嘴體系中存留的膠不固化。設備封存不用時，設備體系內存留的膠要鏟除潔凈。
7. To ensure that the retained glue in the system is not solidified during operation or shutdown, and there are protective measures to ensure that the glue retained in the system is not solidified. When the equipment is not sealed, the glue stored in the equipment system should be removed.
(本文的精彩內容來自:濟南昌盛機械，更多的詳細內容請點雙組份打膠機官方網站：謝謝您的到來 http://ruiyingjituan.com)
(The highlight of this article is from Jinan Changsheng Machinery. For more details, please visit the official website of the two-component glue beater: Thank you for coming to http://ruiyingjituan.com)